There are no product questions yet.
If you are running an IRS rear end in your buggy then you may already be aware but pivot bolts coming out is a common issue if they are not correctly tensioned and punched in place. When using your buggy offroad it is not worth the chance of forgetting to check or worse still having one come out. There are many options on the market whit locking wire, weld on tabs with bolt bits etc but we have found over the years that there is no substitute for the pin and pipe method. With the pin and pipe you get a solid solution to an age old problem and once fitted you will never have to worry about your pivot bolts again. The kit comes complete with the following:
Fitting the locks is simple although you will need a welder and grinder / wire brush.
The retainer lock has been designed to allow the removal of the pivot bolt by simply removing the pin. With the pin in place simply fold the retaining clip over the tube to hold it in place